The SMOK Nord Replacement Coil Pack come in two types: Regular and Mesh. The Nord Regular is rated at 0.6 ohm, uses a Kanthal Mesh and has a direct lung airflow. The Nord Mesh is rated at 1.4 ohm, uses a Kanthal coil, and is intended for MTL vaping. Nord Replacement Coils have two o-rings on the top and one o-ring on the base for a quick plug and play system.
Packing : PACK OF 5
Step 1. Drop e-liquid in the center of the coil ensuring the juice is soaked up by the cotton and let it slide down so it hits the cotton and wire. Repeat this process on the wick holes on the side of the coil. The juice will soak the cotton and this will ensure that you won't experience a dry hit.
Step 2. Attach your tank and fill with e-liquid then leave it to stand for a minute or two, so that the juice in the tank gets soaked up by the coil/atomizer too.
Step 3. After you have primed the coil and let it sit for a few minutes you should fire your device below the recommended wattage and slowly increase in smaller intervals to ensure your atomizer does not burn out right away. It's recommended that you don't fire your device at maximum recommended wattage until you've puffed on it approximately 10 times